New Braunfels Area Office Roof Replacement

Roof replacement for the New Braunfels Area Office Building. In general, the work includes, but is not limited to, the following items: 1. Provide separate bids for Building B as identified on photo 2. Remove existing roofing system to deck including existing roof field, insulation, metal edge, flashings, vent stacks, curbing and all other general rooftop accessories. 3. Verify integrity of existing deck 4. Repair and/ or replace existing deck as required. 5. Install ISO roof insulation as required to meet current state and city energy codes. 6. Install new fully adhered Built-Up Roof (BUR) including all materials, metal edge, flashing, boots, vent stacks, curbing and all other general rooftop accessories as needed. 7. Install new walking pads from roof access to and around existing roof top units (RTU’s). 8. Provide and install new metal roofing - Mueller snap lock 24 gauge (Color: Match coping) 9. Provide taper material as needed to comply with manufacturer’s warranty for standing water. 10. Install exterior roof access ladder with secured access 11. Provide a minimum two (2) year Warranty on all installation work. 12. Provide minimum twenty (20) year NDL manufacturer’s warranty on material and workmanship. 13. Provide turnkey project as indicated on the drawings and as required for complete project.

Division 07 -

Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.