Similar Projects
Reported | 05/04/2022 12:00 AM |
Project Title | Chain Link Fencing Storage Areas |
Physical Address | View project details and contacts |
City, State (County) | Wingate, NC 28174 (Union County) |
Category(s) | Single Trades |
Sub-Category(s) | Fencing |
Contracting Method | Competitive Bids. |
Project Status | Bidding |
Bids Due | View project details and contacts |
Estimated Value | |
Plans Available from | County Agency |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | Install chain link fence/fence partitions in accordance with ASTM F-567. Fence line posts shall be uniform spacing set at a maximum of 10’ o.c. Gate posts shall be placed according to the gate openings specified on the plans. Install fabric on the security side and attach or clip line posts at 15 inches o.c and to rails, braces and tension wire at 24 inches o.c. Erect partitions plumb, rigid, properly aligned and securely fastened in place, complying with the manufacturer’s recommendations. Post bracing and rails shall be installed according to ASTM F-567, maintaining plum position and alignment of fence. Install braces at ends and gate posts and at both sides of corner and pull posts. Tie fabric to line posts at 12 inches o.c. and to braces at 24 inches o.c. A. Chain Link Fabric 1. Fabric Type: a. Finish: ASTM F-668 Class II B Fused and Adhere Black Vinyl Coated Chain Link Fabric 2. Wire gauge: 9-gauge core, 8-gauge finish 3. Mesh Size: 2 inch 4. Selvage Treatment: a. Top: Knuckled b. Bottom: Knuckled 5. Clamps a. Beveled 6. Ties a. Steel (NOT Aluminum) B. Line Post: 1. Comply with ASTM F-1043 for Framing, ASTM F-1083 Pipe a. Schedule 40 pipe, 2 ½” OD C. Corner or Terminal Post: 1. Comply with ASTM F-1043 for Framing, ASTM F-1083 Pipe a. Schedule 40 pipe, NPS 3 inch b. Set in concrete footing D. Swing Gate Post 1. ASTM F-1043 for Framing, ASTM F-1083 Pipe a. Schedule 80, NPS 4” OD, concrete filled and set in concrete footing E. Tension Wire 1. Bottom of Fabric a. 7 gauge F. Fence Fittings (Post and Line Caps, Rails and Brace Ends, Sleeves-Top Rail, Tie Wires and Clips, Tension and Brace Bands, Tension Bars, Truss Road); 1. ASTM F-626 G. Brace Rail, Mid Rail, and Top Rail 1. ASTM F-1043 for Framing, ASTM F-1083 Pipe a. Schedule 40, 1-5/8” OD H. Concrete 1. ASTM C-150 Type I. I. Subsurface Utility Locating Services 1. The awarded vendor will be responsible for locating all subsurface utilities. |
||
Details |
|
||
Bidder's List | View project details and contacts | ||
Prospective Bidders | View project details and contacts | ||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |