Fix the Bricks Project 377

Question Submission Close Date 1/3/2023 5:00 PM MST Work items include: o Obtain building permit and engineering stamp for seismic retrofit o Remove lower portion of the roof covering and decking from the roof to gain access to top of brick walls for the seismic roof to wall connection o Install pins, bolts, framing anchors, blocking and straps as per engineering plans and details for the building permit o Bracing of chimney(s), if applicable, per engineering plans and details for the building permit o After final inspection is completed, install roof decking where removed o Install new roof covering to match existing, as close as possible, along the perimeter of the home where removed for seismic retrofit o Clean up and removal of all construction debris o The Unreinforced Masonry gable walls will require additional seismic improvements not listed in the Scope of Work. o The seismic improvement may either include gable bracing attached to the brick gable or a perpendicular shear wall attached to the brick gable. o At permitting, a stamped engineered drawing shall detail the seismic improvement procedure. All contractors participating in this project must have a Unique Entity ID (UEI) number and be registered on the federal System for Award Management (SAM) For further information, contact BARBARA TOBIN at (385) 499-0383 or SHYANN HUGOE at (801) 799-3698.

Division 07 -

Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.