Construct Two-unit Box Hangar and Aprons for Box Hangars (Re-Bid)

Project Canceled per owner Construction of a two unit box hangar and construction of aprons for box hangars Includes the following approximate quantities: 322 SY of 6" PCC Pavement, 322 SY of 6" Granular Base, 1 LS Pre-Engineered Hangar Building, 2-Bay, 42' x 80' (Including Electrical in Hangar), with an alternate for 1 LS Utility Extensions in Hangar (Water and Sanitary Sewer), and an alternate for 1 LS Pre-Engineered Hangar Building, 80' x 80' (Including Electrical in Hangar). Work on the improvement shall commence upon approval of the contract by the Commission, and as stated in the Notice to Proceed. Shop drawings for approval of the hangar building shall be submitted no greater than Thirty (30) Calendar Days following final execution of the project contract by all parties. All work under the Contract must be substantially complete on or before One Hunded Twenty (120) Calendar Days following arrival of the hangar building components (structural steel, sheeting, doors) on-site. Contractor shall share all correspondence regarding anticipated delivery timeframe of the hangar components with the Owner and Engineer. Damages in the amount of $200.00 per Calendar Day will be assessed for each Calendar Day the work remains incomplete. Each bidder shall accompany its bid with bid security, as defined in Section 26.8 of the Iowa Code in the amount equal to ten (10) percent of the total amount of the bid . Preference shall be given to domestic construction materials by the contractor, subcontractors, material, men, and suppliers in performance of the contract and further, by virtue of statutory authority, preference will be given to products and provisions grown and coal produced within the State of Iowa, and to Iowa domestic labor, to the extent lawfully required under Iowa statutes. Failure to submit a fully completed Bidder Status Form with the bid may result in the bid being deemed nonresponsive and rejected. 9I220BNW100 As of June 21, 2023, no new information available

Division 03 -	Concrete, Concrete Forming and Accessories, Concrete Forming, Structural Cast-in-Place Concrete Forming, Concrete Reinforcing, Cast-in-Place Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Metal Doors and Frames, Entrances, Storefronts, and Curtain Walls, Windows, Door Hardware.
Division 09 -	Finishes, Flooring, Painting.
Division 10 -	Specialties, Signage, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Flagpoles.
Division 11 -	Equipment, Parking Control Equipment.
Division 13 -	Special Construction, Fabricated Engineered Structures, Metal Building Systems.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC).
Division 26 -	Electrical, Lighting, Interior Lighting, Exterior Lighting.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Video Surveillance, Fire Detection and Alarm.
Division 31 -	Earthwork, Site Clearing, Grading, Earthwork Methods.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.