2020-2021 Village of Lexington Concrete Work

1.A construction schedule mutually agreed between the Village Utility Manager and the Contractor. All work shall be conducted during normal working hours 7:00 am to 7:00 pm. 2.Removal of existing concrete where applicable and hauling removed concrete to a dumpsite outside of the village, or to a dumpsite acceptable to the owner inside the village. 3.If property stakes are disturbed during the progression of any project it shall be the contractors’ responsibility to have the stakes replaced by a licensed surveyor. 4.Removal of sod in areas that sidewalk does not currently exist where applicable. Removed sod may be hauled to a designated dumping area within the village. 5.Installation of a minimum of 4 inches of fill sand needed, to set grades, and to be compacted to at least 95% minimum density. 6.Installation of minimum 4000 psi concrete sidewalk which is to be 5 feet wide unless stipulated otherwise. Thickness shall be 4 inches in normal foot traffic areas. Areas at driveways and approaches are to be 6 inches thick unless stipulated otherwise. 7.Expansion joint material is to be placed where needed between cement and asphalt, buildings, etc. Expansion joint shall be placed in the sidewalk at a maximum of every 40 linear feet and also at areas where 4-inch concrete meets 6-inch concrete. Stress crack joints shall be placed in the sidewalk at a maximum of every 5 feet. A plastic sleeve shall be provided by the village in areas where a water shut off valve may be within the sidewalk.

Division 03 -

Concrete, Cast-in-Place Concrete.