RFP D/B - Federal Correctional Institute (FCI) - City of Leavenworth

The Federal Bureau of Prisons (BOP) anticipates award of a Firm-Fixed Price Design-Build contract for the design and construction of a Medium Security, Federal Correctional Institution (FCI) to be located in Leavenworth, Kansas near Metropolitan Avenue and Grant Avenue. The scope of work includes all architectural, engineering, construction and other related services necessary to provide a new federal correctional facility. The proposed project is currently planned to consist of a group of buildings in a "campus plan" arrangement with related site utilities and site development. This FCI will have a gross building area of approximately 52,000 square meters and be designed to house and support approximately 1152 inmates. The anticipated performance period of this project is 1095 days after the notice to proceed is issued. The estimated magnitude of this project is more than $300,000,000. The North American Industrial Classification System (NAICS) code for this project is 236220 with a corresponding small business size standard of $39.5 million. Firms larger than this average will be required to submit a small business subcontracting plan if selected to submit a proposal unless the services will be completed fully in-house by the firm for the entire contract duration. Interested entities must be registered in the System for Award Management (SAM) at www.sam.gov. NAICS code 236220 must be included, where applicable, in the registrations. For consideration on this project the offeror at a minimum must be a firm or joint venture with experience, individually or as a member of a team, successfully and satisfactorily completing a project of similar size and scope. All responsible sources may submit a proposal which will be considered. The design of the architectural, structural, mechanical, electrical, civil, or other engineering features of the work shall be accomplished or reviewed and approved by architects or engineers registered to practice in the particular professional field involved in the State of Kansas. Participation by architects, engineers, consultants and subcontractors located within the State of Kansas is encouraged. Participation by small, small-disadvantaged, HUBZone small businesses, woman-owned small businesses, veteran-owned businesses, and service-disabled veteran-owned small businesses is encouraged. The Offerors included in Phase Two will be required to submit a subcontracting plan for this procurement regarding the utilization of small, small-disadvantaged, woman-owned small, veteran-owned small businesses, and service-disabled veteran-owned small businesses. The FBOP will be utilizing two-phase Design-Build selection procedures. This notice is not a request for proposals. Interested offerors may obtain a Phase One solicitation of the two-phase process, distributed solely through the General Services Administration's System for Award Management web site, http://www.sam.gov. Hard copies of the Phase One solicitations will not be available. The web site provides downloading instructions. All future information regarding this acquisition, including solicitation amendments, will also be distributed solely through http://www.sam.gov. Interested parties are responsible for monitoring the web site to ensure they have the most up-to-date information regarding this acquisition. Phase One qualification proposals will be evaluated to determine which firms will be selected as offerors for Phase Two. Phase Two participants will submit competitive past performance, technical, small business subcontracting plan and price proposals as defined in the Phase Two solicitation. The Phase Two evaluation factors, in descending order of importance are: Past Performance (descending order Sub-factors: Past Performance Quality Control and Quality Assurance, Relevance of Past Performance, Demonstrated Commitment of Team Members and Key Personnel, and Performance Problems); Preliminary Design and Proposed Technical Solutions; Proposed Organization and Key Personnel, Consultants and Subcontractors (descending order Sub-factors: Project Team Organization, Design-Build Offeror including Key Personnel, Consultants and Sub-contractors including Key Personnel); Management and Scheduling Approach, including Quality Control and Quality Assurance (Sub-factors: General Approach including Team Coordination and Quality Control and Quality Assurance, Proposed Design-Build Schedule and Monitoring of the Schedule, Planning for Project Completion); Small Business Subcontracting; are significantly more important than Price, however, as proposals become more equal, price becomes more important and may be a determining factor for award The point of contact for inquiries and clarifications is Michelle Morgan, Contracting Officer, Federal Bureau of Prisons, Acquisitions Branch, 320 First Street NW, Room 901-5, Washington, D.C. 20534. The point of contact can be reached at mrmorgan@bop.gov. This requirement will be fulfilled pursuant to the Federal Acquisition Regulation (FAR) 36.6.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Concrete Forming, Concrete Reinforcing, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry, Concrete Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications, Metal Specialties, Detention Enclosures.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Access Doors and Panels, Special Function Doors, Security Doors and Frames, Security Gates, Detention Doors and Frames, Windows, Special Function Windows, Detention Windows, Detention Window Screens, Hardware, Glazing.
Division 09 -	Finishes, Flooring, Painting and Coating, Special Coatings, Concrete and Masonry Coatings.
Division 10 -	Specialties, Signage, Lockers, Flagpoles, Security Mirrors and Domes.
Division 11 -	Equipment, Loading Dock Equipment, Detention Equipment, Detention Pass-Through Doors, Detention Gun Lockers, Foodservice Equipment.
Division 12 -	Furnishings, Detention Furniture.
Division 13 -	Special Construction, Special Purpose Rooms.
Division 21 -	Fire Suppression, Instrumentation and Control for Fire-Suppression Systems, Water-Based Fire-Suppression Systems, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Facility Sanitary Sewerage, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Lighting, Interior Lighting, Emergency Lighting, Special Purpose Lighting, Detention Lighting, Exterior Lighting.
Division 27 -	Communications, Data Communications, Voice Communications, Audio-Video Communications, Audio-Video Systems, Electronic Digital Systems, Public Information Systems, Distributed Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Video Surveillance, Electronic Detection and Alarm, Fire Detection and Alarm.
Division 31 -	Earthwork, Earth Moving, Grading, Excavation and Fill, Earthwork Methods, Soil Treatment.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Planting, Turf and Grasses.
Division 33 -	Utilities, Instrumentation and Control for Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.