Similar Projects
Last Updated | 03/25/2022 09:43 AM |
Project Title | Emergency Repairs, Residential Homes - 2946 12th Avenue South |
Physical Address | View project details and contacts |
City, State (County) | Saint Petersburg, FL 33712 (Pinellas County) |
Category(s) | Residential |
Sub-Category(s) | Single-Family Homes |
Contracting Method | Competitive Bids. |
Project Status | Results |
Bids Due | View project details and contacts |
Estimated Value | |
Plans Available from | |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | SECTION A - ROOFING 1) Trim all greenery away from roof structure a minimum of four (4') feet. 2) Remove existing roofing and roofing components to bare wood. Removal and replacement of up to 160 s.f. of decking (any type). MUST be included in roofing proposal. NOTE: Any wood replacement over 160 s.f. of any type MUST be verified by change order, R.O. and a material receipt. Any new wood which is exposed MUST be primed and painted. 3) Materials requirement: (a) Install new dry-in materials, secondary water barrier, fasteners, lead boots, pitch buckets, metal valley and flashing. (b) Install new drip edge which must be a minimum of 2 ½" face and 3" back onto roof. (c) Install 1" x 2" edging with pressure treated wood or redwood under drip edge. (exception: not required when using Aluminum, Vinyl or vinyl coated aluminum soffit and fascia). (d) When installing new Aluminum, Vinyl or vinyl coated aluminum soffit or fascia, the drip edge or gravel stop MUST match. (e) Install ridge vent where possible. No mechanized venting systems allowed. SECTION B - GUTTERS / DOWNSPOUTS / SPLASH BLOCKS If specified, a complete system includes gutters, hangers, down spouts, straps, elbows, splash blocks, etc. Contractor must specify material to be installed. SECTION C - VENTILATION 1) Foundation: Vents - use 8" x 16" aluminum units or pressure treated wood fame with 1/4" x 1/4" hardware cloth and attach with screws. 2) Access Panels: Use pressure treated wood frame, latched, with 1/4" x 1/4" hardware cloth. 3) Soffit Vents: Use a minimum 18 x 16 aluminum or fiberglass mesh. |
||||||||||||||||||
Details | Single-Family Homes, Renovation.
|
||||||||||||||||||
Bidder's List | View project details and contacts | ||||||||||||||||||
Prospective Bidders | View project details and contacts | ||||||||||||||||||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |