Paving Projects

Bid should include: Milling of area, Clean area, Tack coat and install asphalt, Roll finish, AC bands should be installed where new asphalt meets existing asphalt, Painting of all areas. Mill entire area, and entrances, catch basins, concrete walks and speed bumps as needed. Reclaimed asphalt pavement (RAP) will not be permitted to be used in any surface courses. Catch basins and inlets shall be level in accordance with the design and dimensions and to line and grade as originally set. In the case where adjustments must be made, they will be made prior to laying the asphalt. There are a total of 4 catch basins to be replaced. There are 3 catch basins at Pleasant St. and 1 at Central Office. All edges of the paving process will be sharp, clean and sealed by the contractor. Paint all areas as they were originally. This should include: parking spaces, crosswalks, stop bars, handicap parking, hash-outs, dividing lines, arrows, fire lanes, and no parking.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Precast Concrete.
Division 09 -	Finishes, Painting and Coating.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Paving Specialties, Speed Bumps, Pavement Markings.
Division 33 -	Utilities, Storm Drainage Utilities, Storm Utility Drainage Piping, Storm Utility Water Drains, Utility Storm Water Treatment, Catch Basin Insert Utility Storm Water Filters, Storm Drainage Structures.