2021 Tar and Chip Improvements Various Roads

To provide all materials and labor necessary to perform the work of the project as defined by the Contract Documents and Drawings based on a lump sum unit cost price and consists of but is not limited to the following: Contractor shall furnish all labor, equipment, material, supplies, environmental protection, signage, traffic control, secondary sweeping, and other incidentals necessary to provide polymer modified hot melt ASTM D 6690 Type II material Crack Sealing applied complete in-place and a double application of polymer modified bituminous Seal Coat per Penn Dot Pub 408 Section 470 followed by a Type II Slurry Seal per Penn Dot Pub 408 Section 482. 2. Following are a list of the roads to receive a Double Bituminous Chip Seal Coat and a Type II Slurry Seal: a. Apple Street – 4th Street to 7th Street: Sweep and provide a double application of chip seal coat and then apply Type II slurry seal of existing roadway surface….6,160 Square Yards. b. 6th Street - Jefferson Street to Butternut Street: Sweep and provide a double application of chip seal coat and then apply Type II slurry seal of existing roadway surface….5,060 Square Yards. c. Mimosa Court - Apple Street to 7th Street: Sweep and provide a double application of chip seal coat and then apply Type II slurry seal of existing roadway surface…. 4,880 Square Yard. d. Borough Hall parking lot: Sweep, blow clean all cracks, and apply hot melt Crack Seal….1,000 pounds

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Paving Specialties, Pavement Markings.
Division 33 -	Utilities, Storm Drainage Utilities, Storm Drainage Structures.