Replacement of Ridge Road Bridge over Salmon Creek

The work will include, but not be limited to, removal of the existing cast-in-place concrete superstructure and replacement with a three-sided precast concrete structure founded on shallow foundations bearing on bedrock. The bridge will be placed on a skew to align with the stream and medium stone fill will be placed in the vicinity of the bridge abutments for embankment protection. The project includes the removal of an existing watermain carried by the bridge and replacement with a 10” HDPE watermain installed by directional drilling.There will be full-depth pavement reconstruction extending approximately 300 feet within the limits of the project. Box beam guiderail will be installed.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.