Replace Fencing and Gate

The project contains, but is not limited to, the following work items: 1) The contractor shall remove and properly dispose of offsite all portions of the existing chain link security fence and the existing entrance chain link swing gate. 2) The contractor shall furnish and install a new chain link security fence, along the same lines of the existing security fence, as shown and detailed on the project drawings, and, as specified in this document. Approximately 442 feet of the new security fence shall consist of 11 foot high chain link fabric topped by an added 1 foot of barbed wire. Approximately 504 feet of the new security fence shall consist of 7 foot high chain link fence fabric topped by an added 1 foot of barbed wire. 3) The contractor shall furnish and install a new, 16 foot wide, swing gate. 4) The contractor shall furnish and install lightning protection & grounding rods for the fence and gate as shown on the project drawings and as specified in this document. 5) The contractor shall properly dispose of all removed materials, waste, and debris offsite.

Division 32 -

Exterior Improvements, Fences and Gates.