Similar Projects
| Reported | 10/16/2021 12:00 AM |
| Project Title | Membrane Bubble Tube Diffuser for Wastewater Aeration |
| Physical Address | View project details and contacts |
| City, State (County) | Sunrise, FL (Broward County) |
| Category(s) | Sewer and Water |
| Sub-Category(s) | Sewage Treatment Plant |
| Contracting Method | Competitive Bids. |
| Project Status | Request for Quotations |
| Bids Due | View project details and contacts |
| Estimated Value | |
| Plans Available from | Municipal Agency |
| Owner | View project details and contacts |
| Architect | View project details and contacts |
| Description | Fine Bubble Membrane Tube Diffusers used in the aeration process of wastewater. The following are the minimum specifications for these diffusers: 1) Fine bubble tube diffuser; 2) 2.5 inch diameter, minimum; 3) 30 inches, nominal length; 4) Membrane Material shall be EPDM 5) Diffusers shall have a ¾” stainless steel nipple (approximately 2.5” long) for connection to the main air header; 6) Membranes shall be held in place on body by two (2), 316 stainless steel clamps 7) The body of the diffusers shall be PVC or ABS; 8) Diffusers shall be non-clog and non-buoyant type as manufactured by SSI, Inc. (AFTS2100 Series), Environmental Dynamics International (FlexAir T-Series) or an approved equal. |
||
| Details |
|
||
| Bidder's List | View project details and contacts | ||
| Prospective Bidders | View project details and contacts | ||
| Project Documents |
 Engineered Spec Sheet  Architectural Plans  Other Documents |
