Z2--Epoxy Flooring Repair

LI 001: Remove existing carpet tiles from north side of building 562 (on Joint Base McGuire-Dix-Lakehurst, Route 547 Lakehurst, NJ 08733) near the loading doors on the first floor and remove the existing damaged epoxy flooring at the south side of the building in the Atrium area at first floor SW entry door and entire third floor landing area. Prepare all areas for new epoxy coating. Apply primer to existing surface as required to allow resin to properly bond to existing surface. Apply elastic-type epoxy resin mixture with binding glue (thicken) agent to all new areas. Apply an anti-slip top coat-sealant to all new areas to best match the existing floor. Provide a five (5) year warranty on the material and workmanship for all repairs. Construction Wage Rate Requirements apply. See attached SOW and COVID Operating Policy for additional information., 1, LABOR; LI 002: The Contractor shall provide all personnel, equipment, tools, labor, materials, supervision, and other items necessary to perform the work specified. Required materials include: solvent, primer, elastic-type epoxy resin mixture with binding glue (thicken) agent, and anti-slip sealant. See SOW., 1, MATERIAL;

Division 09 -

Finishes, Flooring.