RFP - I-10 Mobile River Bridge Project

As of August 22, 2023, negotiations are underway with short-listed design builders. A firm timeline for award and construction has not been determined. *The closed solicitation has been included below for reference: This Request for Qualifications and Proposals ("RFQ/RFP"), as it may be amended, is issued by the Alabama Department of Transportation ("ALDOT") to seek competitive proposals (individually, a "Proposal" and collectively, "Proposals") for a progressive design-build contract that will consist of a Design-Build Agreement and related documents (the "Design-Build Agreement" or “DBA”). The DesignBuild Agreement will provide that the successful Proposer ("Design-Builder") shall develop, design, and construct (subject to the terms of the DBA) a new six-lane bridge with a minimum of 215 feet of air draft clearance across the Mobile River channel (the "Project"), with tolling of the bridge. The Project, together with a second separate progressive design-build project for the replacement of the two existing two-lane bridges across the Mobile Bay with two three-lane bridges built above the 100-year storm event maximum wave height (the "Bayway Project"), will address acute and growing congestion issues by increasing the capacity of I-10, providing a direct interstate route for hazardous material transport and minimizing adverse impacts to the maritime industries. The Project and the Bayway Project will also improve geometrics, enhance access to major industrial and freight destinations in the Mobile area, and facilitate economic growth. The Project and the Bayway Project extend approximately eleven miles through Mobile and Baldwin Counties, Alabama. *Project information, including timeline and contacts, has been obtained through public sources. The content management team continues to pursue additional details; however, the contact(s) listed have yet to disclose or confirm any information. Inquiries should be directed to the contact(s) listed.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.