State Attorney's Office - Lobby Area Security Modifications

a. All work shall comply with ESS Access Control System specification 281300, revision 1/22/18 (Exhibit "3") and ESS CCTV specification 282300, revision 5/1/18 (Exhibit "4"). All substitutions require written authorization from ESS. b. Tru Armor Ballistic film is the basis of design for this project. Product information can be obtained by contacting Dave Trudeau of Tru-Armor at (847) 655-8447 for information concerning the PBSO approved tinting for this project. Product specifications are not to be made public. c. Data sheets for all equipment and cabling shall be submitted for review and approval. See Exhibit "2" d. Purchase and install all equipment, wiring, and infrastructure. This is a turnkey project. e. Reference Exhibit "1" for equipment locations and detailed information. f. Network cable shall be CAT 6 rated and certification testing of cable installation shall be performed to TIA-568-C.2. Evidence of a current equipment calibration and a printed test report of installed network cables shall be submitted to ESS. All cables shall be labeled on both ends per ESS specification. g. Notify ESS at least a week in advance of work so site visits may be scheduled for inspections and acceptance testing of the installation. h. The finished height of all walls in Area C shall be the same. The minimum height of all walls in Area C shall be 8 foot.

Division 27 -	Communications, Common Work Results for Communications.
Division 28 -	Electronic Safety and Security, Operation and Maintenance of Electronic Safety and Security, Common Work Results for Electronic Safety and Security.