Similar Projects
Last Updated | 06/29/2023 11:12 AM |
Project Title | Water Distribution, Wastewater Collection, Storm Water Facilities and Paving to Serve Attwater, Section One |
Physical Address | View project details and contacts |
City, State (County) | Hempstead, TX 77445 (Waller County) |
Category(s) | Heavy and Highway, Sewer and Water |
Sub-Category(s) | Maintenance, Paving/Reconstruction, Site Development, Water Lines |
Contracting Method | Competitive Bids |
Project Status | Bidding, Construction start expected July 2023 |
Bids Due | View project details and contacts |
Estimated Value | $600,000 [brand] Estimate |
Plans Available from | Civil Engineer |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | Project scope shall include the installation of approximately 16,300 LF of 4"-12" PVC water line; 12,100 LF of 8"-12" PVC gravity sanitary sewer; 15, 200 LF of 24"-60" RCP storm sewer; and 56,900 SY of 6" reinforced concrete pavement. Description of Work. a. Under this Contract, Contractor shall furnish all materials, appliances, tools, equipment, transportation, services, and all labor and superintendence necessary for the construction of the Work as described in these Technical Specifications and as shown on the Plans. The completed installation shall not lack any part that can be reasonably implied as necessary to its proper functioning or any subsidiary item that is customarily furnished, and Contractor shall deliver the installation to Owner in operating condition. b. The Work, in general, under this Contract includes the purchase, installation, and construction of all structures, equipment, and materials, including appurtenances, as indicated on the Plans. Major items of construction and services required are designated as follows: (1) Install and adjust waterlines, valves, valve boxes, flushing valves, fittings, and appurtenances; (2) Construct and adjust sanitary sewer, manholes and appurtenances; (3) Repair existing pavement affected; (4) Furnish and install all subsidiary items as necessary to complete the project; (5) Perform testing as specified on installed lines; and (6) Clean-up project area upon completion. Technical Specifications. a. Technical Specifications are of the abbreviated, simplified or streamlined type and include incomplete sentences. The omission of words or phrases such as "Contractor shall," "in conformity therewith," "shall be," "as noted on Plans," "according to Plans," "a," "an," "the," and "all," are intentional. Omitted words or phrases shall be supplied by inference in same manner as they are when a "note" occurs on Plans. b. The Technical Specifications are interpreted to require that Contractor shall provide all items, articles, materials, operation or methods listed, mentioned, or scheduled either on Plans or specified herein, or both, including all labor, materials, equipment, and incidentals necessary and required for their completion. c. Whenever the words "designated," "submitted," "observed," or similar words or phrases are used, it shall be assumed that the word "Engineer" follows the verb as the object of the clause, such as "observed by Engineer." d. All references to standard Technical Specifications or manufacturer's installation directions shall mean the latest edition thereof on the date Bids are due unless specifically noted otherwise. |
||||||
Details |
|
||||||
Bidder's List | View project details and contacts | ||||||
Prospective Bidders | View project details and contacts | ||||||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |