Chain Link Fence

Removal of existing fence and complete installation of new fence. Contractor is responsible to remove existing fence and dispose of it off site. Approximately 518 feet of fence is to be replaced. Terminal posts shall be 3 inch “OD LG-40 3.12 lbs per foot set in 36 inch deep by 12-inch-wide footing. Line posts shall be 2-1/2” OD LG-40 2.28 lbs per foot pvc coated black LG_40 pipe set in 36 inch deep by 10-inch-wide footings. Top rail 1-5/8-inch OD x 21 feet long LG-40 PIPE 1.84 lbs per foot black pvc coated. Top rail connectors 6-inch long pvc coated black PS sleeve. Line posts are to be set 8 foot on centers in 36 inch deep by 10 inch wide footing. Fence Fabric 48-inch KK vinyl coated 2-inch mesh. Tension wire for bottom of fence 6 gauge black coated. Tension wire connected with 9 gauge 1-9/16-inch hog rings spaced 24 inches on center. All fittings’ caps, carriage bolts, nuts, tension bars, bands, offsets, to be heavy black vinyl coated. Tie wires to be black vinyl coated 9 gauge 6-1/2 inch, spaced15 inch on center for line posts and 24-inch center for rails. Post footing if hand mixed shall be 80lb bags of concrete. Fabric to be set just above the existing grade. Contact Mr. James Johnson, Superintendent of Public Works, for specific locations of fence.

Division 32 -

Exterior Improvements, Fences and Gates, Chain Link Fences and Gates.