CD 21060- Twilight Fence Installation

This project is regarding a Installation of a Vinyl privacy fence. The work shall include, but not be limited to the following: A. Clean all fence line, remove 2 trees and brush close to fence, dig up trees and remove, remove all roots of trees to keep them from coming back into the fence line. Level all the ground along fence line. B. Install new 6’x8’ vinyl fence with a 7” top and bottom rail, all new post. Install 2 double swing gate at the driveway entrance back exit with 5” post and all hardware with locking drop post. All existing post holes must be filled, and new post holes must meet specifications C. The vinyl/PVC fence will be a heavy-duty Privacy Fence Panel White and able to stand up to one hundred mile an hour wind D. Vinyl/PVC post will be a 5’x5’x8’ post set in concrete or to manufacture standers. E. All post cap will be NEW ENGLAND Style Post Caps and adhered as to manufacture requirements. F. Post, caps, and panels will be the same manufacture. A Spec sheet will need to be approved by OPWDD.

Division 32 -

Exterior Improvements, Fences and Gates.