J045--Kitchen Hood Controls Replacement

The contractor will furnish and install new systems to interface with the existing kitchen exhaust hood system. The Contractor shall supply all hardware, parts, tools, labor necessary to furnish and install the Intelli-Hood system(s) as specified below: IntelliHood Install Perform installation of demand ventilation controls for 1 kitchen Includes installation of the IntelliHood components. Intelli-Hood component work shall be completed by Melink Corporation authorized personnel. Work shall include but is not necessarily limited to: 1. Install temperature sensors 2. Install optic sensors and air purge units 3. Install hood controllers 4. Install low voltage cables between the hood controllers, air purge units, temperature sensors and optics sensors. IntelliHood Start Up - Perform startup of demand ventilation controls for kitchen. This shall be done by a Melink authorized personnel. Customer training is required during the start up. Intelli-Hood Service - Electrical Work shall be completed by a licensed electrician. Electrical work shall include but is not necessarily limited to: 1. Mount and power Intelli-Hood System Controller(s). 2. Install Touchpad(s) and conduit where cable is exposed. 3. Install VFDs. 4. Install CAT5 communication cables from the Intelli-Hood System Controllers to the VFDs. 5. Furnish and install all necessary non-Melink furnished control wire for system integration

Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Special Exhaust Systems, Central HVAC Equipment.
Division 26 -	Electrical.