J--RFQ - Locks and Alarm Maintenance Services

The MICC Fort Hood requires the following items, Meet or Exceed, to the following: Base Period of Performance: 09/25/2021 - 09/24/2022 LI 001: Service inspection of Locks. Please read PWS for additional information., 1, JOB; LI 002: Diagnostics of faulty equipment and repairs or replacements. Please read PWS for additional information., 1, JOB; LI 003: Service inspection of six (6) gates. Please read PWS for additional information., 1, JOB; LI 004: Lubrication of gate chains. Please read PWS for additional information., 1, JOB; LI 005: Service Contract Report (SCR): The Contractor shall report all Contractor labor hours (including Subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. The contractor shall completely fill in all required data fields using the following web address: https://sam.gov/SAM/, then select “Entity Registrations”, and then select “Service Contract Reporting (SCR)”. Reporting inputs shall be for the labor executed during the period of performance during each Government FY, which runs from October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk by clicking on “Send an email” which is located under the Help Resources Ribbon on the bottom of the login page of the applicable SCR website at https://sam.gov/SAM/. The cost, if any, for providing this data shall be entered into the space provided at this CLIN. If no direct cost is associated with providing the data, enter “Not a Direct Cost”., 1, EA; Option 1 Period of Performance: 09/25/2022 - 09/24/2023 LI 001: Service inspection of Locks. Please read PWS for additional information., 1, JOB; LI 002: Diagnostics of faulty equipment and repairs or replacements. Please read PWS for additional information., 1, JOB; LI 003: Service inspection of six (6) gates. Please read PWS for additional information., 1, JOB; LI 004: Lubrication of gate chains. Please read PWS for additional information., 1, JOB; LI 005: Service Contract Report (SCR): The Contractor shall report all Contractor labor hours (including Subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. The contractor shall completely fill in all required data fields using the following web address: https://sam.gov/SAM/, then select “Entity Registrations”, and then select “Service Contract Reporting (SCR)”. Reporting inputs shall be for the labor executed during the period of performance during each Government FY, which runs from October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk by clicking on “Send an email” which is located under the Help Resources Ribbon on the bottom of the login page of the applicable SCR website at https://sam.gov/SAM/. The cost, if any, for providing this data shall be entered into the space provided at this CLIN. If no direct cost is associated with providing the data, enter “Not a Direct Cost”., 1, EA; Option 2 Period of Performance: 09/25/2023 - 09/24/2024 LI 001: Service inspection of Locks. Please read PWS for additional information., 1, JOB; LI 002: Diagnostics of faulty equipment and repairs or replacements. Please read PWS for additional information., 1, JOB; LI 003: Service inspection of six (6) gates. Please read PWS for additional information., 1, JOB; LI 004: Lubrication of gate chains. Please read PWS for additional information., 1, JOB; LI 005: Service Contract Report (SCR): The Contractor shall report all Contractor labor hours (including Subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. The contractor shall completely fill in all required data fields using the following web address: https://sam.gov/SAM/, then select “Entity Registrations”, and then select “Service Contract Reporting (SCR)”. Reporting inputs shall be for the labor executed during the period of performance during each Government FY, which runs from October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk by clicking on “Send an email” which is located under the Help Resources Ribbon on the bottom of the login page of the applicable SCR website at https://sam.gov/SAM/. The cost, if any, for providing this data shall be entered into the space provided at this CLIN. If no direct cost is associated with providing the data, enter “Not a Direct Cost”., 1, EA; Option 3 Period of Performance: 09/25/2024 - 09/24/2025 LI 001: Service inspection of Locks. Please read PWS for additional information., 1, JOB; LI 002: Diagnostics of faulty equipment and repairs or replacements. Please read PWS for additional information., 1, JOB; LI 003: Service inspection of six (6) gates. Please read PWS for additional information., 1, JOB; LI 004: Lubrication of gate chains. Please read PWS for additional information., 1, JOB; LI 005: Service Contract Report (SCR): The Contractor shall report all Contractor labor hours (including Subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. The contractor shall completely fill in all required data fields using the following web address: https://sam.gov/SAM/, then select “Entity Registrations”, and then select “Service Contract Reporting (SCR)”. Reporting inputs shall be for the labor executed during the period of performance during each Government FY, which runs from October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk by clicking on “Send an email” which is located under the Help Resources Ribbon on the bottom of the login page of the applicable SCR website at https://sam.gov/SAM/. The cost, if any, for providing this data shall be entered into the space provided at this CLIN. If no direct cost is associated with providing the data, enter “Not a Direct Cost”., 1, EA; Option 4 Period of Performance: 09/25/2025 - 09/24/2026 LI 001: Service inspection of Locks. Please read PWS for additional information., 1, JOB; LI 002: Diagnostics of faulty equipment and repairs or replacements. Please read PWS for additional information., 1, JOB; LI 003: Service inspection of six (6) gates. Please read PWS for additional information., 1, JOB; LI 004: Lubrication of gate chains. Please read PWS for additional information., 1, JOB; LI 005: Service Contract Report (SCR): The Contractor shall report all Contractor labor hours (including Subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. The contractor shall completely fill in all required data fields using the following web address: https://sam.gov/SAM/, then select “Entity Registrations”, and then select “Service Contract Reporting (SCR)”. Reporting inputs shall be for the labor executed during the period of performance during each Government FY, which runs from October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk by clicking on “Send an email” which is located under the Help Resources Ribbon on the bottom of the login page of the applicable SCR website at https://sam.gov/SAM/. The cost, if any, for providing this data shall be entered into the space provided at this CLIN. If no direct cost is associated with providing the data, enter “Not a Direct Cost”., 1, EA;

Division 27 -	Communications, Common Work Results for Communications.
Division 28 -	Electronic Safety and Security, Common Work Results for Electronic Safety and Security.