HVAC Work

Contractor is responsible to bid on performing the following work to meet or exceed the minimum standards set below. All installations are to be complete and must conform to manufacturer’s specifications as well as all applicable codes pertaining to same. 1. Have a furnace technician service the HVAC system including the A/C. 2. Replace fuel filter on fuel tank. 3. Replace all air flow filters for heat and A/C. 4. Visually inspect all other components of HVAC system for existing or future problems. 5. After cleaning and preliminary adjustments, furnace is to have final adjustments made for peak efficiency with a combustion analyzer. These readings are to be recorded and left at furnace for future reference. 6. Any component found defective or in need of possible replacement (with the exception of items mentioned above) must be reported to the rehabilitation specialist along with associated costs for possible replacement. This will be covered in a change order. 7. Provide copy of technical report to Owner and Rehabilitation Specialist

Division 23 -

Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.