Lift Station and WWTP Repairs Tropical Storm Harvey Primer Street Lift Station

This project shall provide for the replacement and relocation of all electrical controls into an above ground control building to be constructed on-site, and the replacement of all pumps, piping, and valves inside the existing dry pit, and the replacement of the existing submersible pump in the secondary wet well as shown on the contract plans and specifications. This contract includes, but is not limited to, the following: The Owner shall continue providing bypass pumping utilizing the Owner provided pumps and piping. The Owner shall be responsible for all required maintenance, which shall include, but is not limited to, refueling, greasing, and any other maintenance required by the manufacturer. The Contractor shall be responsible for all required relocation of the Owner provided pumps for the duration of the bypassing operation, including relocating the suction hoses for the pumps to the manhole on Primer Street adjacent to the lift station, and providing any barricading required. Remove and dispose of, or salvage for the Owner, all existing pumps, piping, valves, compressors, blower and electrical control panels and equipment contained in the dry pit. Furnish and install three (3) new non-clog vertical close coupled pumps and all appurtenances, new suction and discharge piping, valves, and fittings. Reconstruct the existing pump foundations as required to fit the proposed pump base and anchor bolts. Remove the existing sump pump in the dry pit. Furnish and install one (1) new submersible sump pump, Hydromatic model SK75M4, in the existing dry pit sump, including new discharge piping, valves, and fittings. 14. Furnish and install one (1) new Forward Curved Direct (FCD) blower, wheel dia. 11.81 inches 3000 cfm, 2 Hp as manufactured by Plastec model Number PLA30XS4P or approved equivalent. Remove the existing submersible pump from the secondary wet well and salvage for the Owner. Furnish and install one (1) new non-clog submersible pump in the secondary wet well. Furnish and install a pre fabricated concrete control building including excavation and backfill, foundation, entrance platform, electrical service, lighting, controls and instrumentation, air conditioning, door, and painting as shown on the plans. Furnish and install all electrical equipment, conduit, conductors, and level controls. Relocate the existing electrical service as shown

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Toilet, Bath, and Laundry Accessories, Emergency Aid Specialties, Fire Protection Specialties, Fire Extinguishers, Storage Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 12 -	Furnishings.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Audio-Video Systems, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Water Utilities, Water Utility Distribution Equipment, Water Utility Pumping Stations, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 40 -	Process Integration, Water Process Piping.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.