Sanding Booth

USAF request the purchase of one (1) Sanding Booth with the following requirements/specifications: One Sanding Booth Open faced; slot in roof for crane Acceptable Range of Dimensions: Exterior Dimensions 96” – 98” Wide X 120” – 144” High X 170” – 176” Deep Interior Dimensions 94” – 96” Wide X 102” – 126” High X 138” – 144’ Deep Constructed of 18 GA. galvanized metal with sound insulated quilt & vinyl sound mat Cartridge filters of nanofiber material rated 99.9% efficient at 0.5 microns Fan specifications: Minimum Face Velocity Created by Suction: 150 FPM, Minimum Motor Power: 10 HP, Equipped with Variable Frequency Drive (VFD) for “soft startup” and reduced suction during cleaning cycle, and Minimum Volumetric Flow Rate: 8,000 cfm Compressed Air Filter/Regulator Pulse clean 24 hour timer – 7 day PLC Clock Minimum of four (4) LED fixtures Safety afterfilter 99.97% HEPA MERV 17 with Magnehelic Guage (99.97% @ 0.3 Micron and above) Auger and Vacutron System. Installation Performance verification Training Sanding booth and associated parts and components shall be Class 2 Division 1 rated products. Contractor shall provide installation, training, and performance verification IAW this SOW. Contractor shall warranty the Sanding Booth for a period of no less than one (1) year.

Division 13 -	Special Construction, Office Shelters and Booths.
Division 41 -	Material Processing and Handling Equipment, Finishing Equipment, Coating Equipment, Spray Painting Booth.