Contractor - Road Creek Bridge and Irrigation Ditch Siphon Project

The Road Creek Bridge and irrigation ditch Siphon project. This project will install a new Owner-furnished bridge. The bridge is a 26' wide by 40' long steel beam bridge. The bridge will be installed in 2 sections, bolted together. Work will consist of 1) constructing a temporary bypass roadway to be used during construction; 2) excavating, installing, the new bridge including all required aggregate base and subbase supporting material, and necessary clearing and grubbing; 3) Install a 2' diameter pipe, 60' long, siphon that will drop down 7' from the inlet to carry EF-5 ditch water under the Road Creek Channel, then raise back up 6.5' to the outlet. ; 4) remove the temporary bypass roadway embankment following completion of construction; and 5) performing all other miscellaneous improvements as required to complete the necessary project work.

Bridge, New Construction.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.