Snow Fence Posts With and Without Anchors

Question Cutoff Date 8/24/2022 02:00:00 PM (ET) This expedites the process and reduces errors for both buyer and supplier. Deliveries shall be F.O.B Destination. All items are tied. Specifications For Steel Line Posts For Field Fence A. Use T-section (or other approved sections) steel posts as line poss with wood posts. Do not use them for corner, brace, pull, end, or gate posts. B. Only one type of steel post may be used in any installation 1,00 feet (300 m) or less in length. C. Equip posts with lugs or other approved means to prevent the fence fabric from moving vertically. D. Use posts that weigh (have a mass of) no less than 1.3 pounds per foot (1.0 kg/m), exclusive of anchor plate. E. Provide each post with steel anchor plate of adequate size, firmly attached. After the anchor plate is attached, completely paint the finished post with a prime coat and an enamel finish coat, with no limitation on color or tip identification except as provided for 1,000 foot (300 m) installations. Ensure the paint is thoroughly dry before posts are bundled for shipment. Unless specified otherwise, use steel line posts that are 7 feet (2.1 m) in length. Weight tolerance must be 1.33 pounds/foot - 1.44 lbs/foot. T-post requirements 1.547" depth x 1.375"wide; studs are approximately 1 7/8" apart. IADOT - Snow Fence Posts With and Without Anchors

Division 27 -	Communications, Common Work Results for Communications.
Division 28 -	Electronic Safety and Security, Common Work Results for Electronic Safety and Security.