Similar Projects
Reported | 05/20/2021 12:00 AM |
Project Title | Warehouse Retrofit-Bldg 1042 |
Physical Address | View project details and contacts |
City, State (County) | Tampa, FL (Hillsborough County) |
Category(s) | Commercial |
Sub-Category(s) | Warehouse/Storage |
Contracting Method | Competitive Bids. |
Project Status | Accepting Letters of Interest |
Bids Due | View project details and contacts |
Estimated Value | |
Plans Available from | Federal Agency |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | CLIN 0001: Pre-Engineered Building, Modified Warehouse Storage P.E.B./Qty: 01-. Modular room. —SAFE Structure Designs, SAFE-MOU204X92 to be considered “equal”, offered products must meet the following salient functional, physical and performance characteristics: 17 ft wide. by 14 ft long by 7.7 feet tall: Maximum Dimension to fit inside warehouse door 3 workstations with table and chairs Server Mount in wall, location must conform to existing LAN input to warehouse for pass through Air Conditioning Pre-wired with 115VAC outlets and 240V Air conditioning External Plug to connect 115VAC into wall outlet External Plug to connect 240VAC into wall outlet Must be fully modular and able to move with forklift to any desired location CLIN 0002: Plywood Rack/Qty: 01 – Moveable rack to store 4 ft x 8ft sheets of plywood —SAFE Structure Designs, SAFE-10PWR-S To be considered “equal”, offered products must meet the following salient functional, physical and performance characteristics: Rack Stand mounted on casters, also forklift capable 10 ft. wide by 8.75 ft. tall by 4 feet long (must be able to fit inside CLIN 0001 dimensions) 11 rows vertically separated by minimum 6 inches from the Shelf below and above to stack plywood sheets (4x8 ft. sheets 1 inch thick) Minimum 3 horizontal stanchions to place the plywood per row for support Constructed galvanized steel with powder coat finish CLIN 0003: Large ISU 70 Bin Rack/Qty: 05 – Stackable ISU 70 Rack — SAFE Structure Designs, part number SAFE-5LISUR-S To be considered “equal”, offered products must meet the following salient functional, physical and performance characteristics: Rack capable of holding 2 Each ISU-70 Bins stacked vertically Minimum Dimensions 10.25 ft. wide by 8.25 ft. long by 8.05 ft. tall Rack Stand mounted on casters, also forklift capable Constructed of galvanized steel with powder coat finish CLIN 0004: Small ISU 70 Bin Rack /Qty: 03 - Stackable ISU 70 Rack — SAFE Structure Designs SAFE-SISUR-S (or Equal) To be considered “equal”, offered products must meet the following salient functional, physical and performance characteristics: Rack capable of holding 2 Each ISU-70 Bins stacked vertically Minimum Dimensions 10.25 ft. wide by 7.42 ft. long by 7.06 ft. tall Rack Stand mounted on casters, also forklift capable Constructed galvanized steel with powder coat finish 4 rows vertically shelves separated by minimum 15.9 inches from the Shelf below and above CLIN 0005: Accessory Rack/Qty: 05 – Rack to hold aircraft equipment — SAFE Structure Designs SAFE-5AR-S To be considered “equal”, offered products must meet the following salient functional, physical and performance characteristics: Minimum Dimensions 10.17 ft. wide by 3.75 ft. long by 7.09 ft. tall Rack Stand mounted on casters, also forklift capable Constructed galvanized steel with powder coat finish |
||||||||||||||||||||||||||||||||||
Details | Warehouse/Storage, Renovation.
|
||||||||||||||||||||||||||||||||||
Bidder's List | View project details and contacts | ||||||||||||||||||||||||||||||||||
Prospective Bidders | View project details and contacts | ||||||||||||||||||||||||||||||||||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |