Repair and Replace Cable, Cheatham Annex, VA

Contractor will direct Bury and Bore approximately 4250' of 100 pair copper cable. All road bores will require placing of 2” Flex or Roll Duct and Mule tape. 1. Place Cable (leaving 10 feet loop) from cross box F109X to corner of Sandra Ave. and C St. 2. Bore/place cable in 2” Flex Duct North to South under C St with mule tape 3. Continue placing cable South on West side Sandra Ave to Corner of Sandra Ave and D St. 4. Bore/place cable in 2” Flex Duct North to South under D St with mule tape 5. Bore/place cable in 2” Flex Duct East to West under Sandra Ave. with mule tape 6. Continue placing cable East on the Southside of D St. through Pedestals DD, DD-0, and DD-1 (leaving a 6 foot loop in each) to Hand Hole. 7. Contractor to replace all 3 above mentioned Pedestals with new CAD 6 type with stone, and to proper grade 8. Intercept Flex Duct in Hand Hole and pull cable with mule tape through Flex duct to Demarcation inside WHSE 12. 9. Contractor will place, ground, and terminate Inside BET terminal 10. Contractor is responsible for all restoration and cleanup with all excavation sites backfilled, tamped, raked, and seeded 11. NCTAMSLANT will identify the F2 count to use at cross box F109X and terminate

Division 26 -

Electrical.