Asbestos Abatement and Demolition

a. The Contractor shall remove all asbestos-containing material according to the asbestos survey report and/or design specifications prepared for this project and in compliance with all EPA, OSHA, and DOLI regulations, and any other applicable law, using best practices. Recommendations are located in the survey report and/or design specifications prepared for this project. b. The Contractor shall contact the environmental contractor that prepared the asbestos survey report to schedule a final clearance inspection. Contact information for the asbestos contractor is located on the survey reports. Asbestos must be removed on all buildings prior to contacting the testing agency. c. The Contractor shall submit the required notifications to the Department of Labor and Industry (DOLI), and any other agency required to be notified, upon notice to proceed and is responsible for all associated costs. d. The Contractor shall furnish all labor, equipment, supervision, and incidentals necessary to provide complete asbestos abatement for each authorized property. e. The Contractor shall follow all state, federal, local codes and ordinances for all asbestos abatement projects. The Contractor is responsible for all permits related to the project being addressed. f. The Contractor shall transport all friable asbestos containing material (RACM) and nonfriable asbestos-containing material (ACM) to a disposal site approved by the Virginia Department of Environmental Quality (DEQ). (The landfill that services the Danville area is First Piedmont Industrial Landfill, 1224 Clarks Mill Road, Ringgold, VA 24586.)

Division 02 -

Existing Conditions, Asbestos Remediation, Asbestos Abatement.