Similar Projects
| Reported | 12/06/2018 12:00 AM |
| Project Title | S-252 D, E & F Culvert Repair Project, Indian River County, Florida |
| Physical Address | View project details and contacts |
| City, State (County) | FL (Indian River County) |
| Category(s) | Sewer and Water |
| Sub-Category(s) | Storm/Sewers |
| Contracting Method | Competitive Bids. |
| Project Status | Accepting Letters of Interest |
| Bids Due | View project details and contacts |
| Estimated Value | $2,000,000 to $5,000,000 |
| Plans Available from | Federal Agency |
| Owner | View project details and contacts |
| Architect | View project details and contacts |
| Description | Work consists of repairs to restore the Culverts S-252 D, E & F in the upper St. Johns River Basin in Indian River County, Florida where ten 72" diameter corrugated metal pipe (CMP) culverts have severely corroded. The work will require demolition and removal of the exposed portions of the culverts which extend beyond the levee embankments. Repairs will require slip-lining and grouting of these culverts using 63" outer diameter (59" inner diameter) ASTM D3035 HDPE pipe. Each culvert is approximately 100 feet in length. Manually operated flap gates will need to be replaced with automatic flap gates or duckbill gates at one end of the five culverts at S-252 E. Existing aluminum slide gates at one end of the 3 culverts at S-252 D & F will be reused and will require transition pieces be fabricated and installed to bridge the 63" OD pipe with the gates fabricated for the 72" CMP. The two remaining roadway culverts will not have gates. Specific Project Challenges: Slip-lining will be performed sequentially to keep the other culverts in operation during the repairs. The work will be performed in the wet to avoid dewatering. | ||||
| Details |
|
||||
| Bidder's List | View project details and contacts | ||||
| Prospective Bidders | View project details and contacts | ||||
| Project Documents |
 Engineered Spec Sheet  Architectural Plans  Other Documents |
