Irving Pool - Andre Reed Park Development

**As of January 27,2023, this project has not yet been awarded. A timeline for award has not yet been established.** MC Project No. 21000467A The Contractor shall be responsible for the installation of a series of water features (also referred to as spray features), and associated plumbing, controls, and electrical. All work shall be performed as indicated on the Contract Drawings and Specifications and include every aspect of work as obvious or implied and necessary to make the work complete and fully operational. The Contractor shall coordinate with the spray equipment vendor and the spray equipment manufacturers for all installation requirements and guidelines prior to bidding the project. The Contractor is also responsible for supplying all required ancillary appurtenances for the installation of the spray features, complete, in place. Questions regarding electronic submissions are welcome via email Purchasing.Agent@allentownpa.gov. Owner has selected these features to be supplied at the pool. Ifthe Contractor selects an alternate manufacturer, the features shall have the same visual look, and functionality as the features shown on the contract plans. Spray feature manufacturer shall be Vortex, or approved equal. Electrical Connections: All main power electrical connections from the exhibit controller to the valves are to be furnished and installed per NEC 680, local codes, manufacturer's recommendations, drawings, and as required by the Engineer in DIVISION 26. Water Connections: Water connection, piping, and valves required to operate the spray features are to be furnished and installed per local codes, manufacturer's recommendations, drawings, and as required by the Engineer. The Contractor shall be required to install all the manufactured equipment and water spray features, all water piping and wiring connecting the manifold and the independent features, and all footings/foundations associated with the work. Contractor shall field install a prefabricated control manifold box in the pool deck. This will allow a place where the spray features can be calibrated and a location for where the Owner can winterize the system. Contractor shall laminate a system start-up and shutdown control instruction sheet and mount inside the door ofthe mechanical room, and a complete set of instruction in a manual for mobile use. The contractor or sub-contractor must be experienced with installing this type of spray equipment and satisfy the owner and engineer of these qualifications. The contractor or subcontractor must demonstrate successful completion of at least five (5) water feature projects ofthis size and scope and be prepared to submit references upon request. Construction of a new pool facility including utility services, new admissions and restroom support buildings, pool (including pumps, filters, spray features), pool deck (including drainage), artificial turf sitting areas, perimeter fencing, site lighting and other Work indicated in the Contract Documents. It is the purpose of this Invitation to Bid to secure a contractor for construction of a new pool facility including utility services, new admissions and restroom support buildings, pool (including pumps, filters, spray features), pool deck (including drainage), artificial turf sitting areas, perimeter fencing, site lighting and other Work indicated in the Contract Documents. Questions regarding electronic submissions are welcome via email through Purchasing.Agent@allentownpa.gov. Bid Bond required DECEMBER 5, 2022 AT 4:00 P.M. Email All Questions To: www.publicpurchase.com, by the aforementioned date

Division 03 -	Concrete, Concrete Forming and Accessories, Concrete Reinforcing, Cast-in-Place Concrete, Concrete Finishing.
Division 04 -	Masonry, Unit Masonry.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Millwork.
Division 07 -	Thermal and Moisture Protection, Dampproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Entrances, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Carpeting, Painting and Coating, Painting, Special Coatings, Cementitious Coatings.
Division 11 -	Equipment, Play Field Equipment and Structures, Playground Equipment, Play Structures.
Division 12 -	Furnishings.
Division 13 -	Special Construction, Swimming Pools, Recirculating Gutter Systems, Swimming Pool Accessories, Swimming Pool Cleaning Equipment.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing, Pool and Fountain Plumbing Systems, Swimming Pool Plumbing Systems.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC).
Division 26 -	Electrical, Special Purpose Lighting, Underwater Lighting.
Division 27 -	Communications.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork, Site Clearing, Selective Clearing, Earth Moving, Grading, Excavation and Fill.
Division 32 -	Exterior Improvements, Athletic and Recreational Surfacing, Site Improvements, Fences and Gates, Planting.
Division 33 -	Utilities.