Similar Projects
| Reported | 02/10/2022 12:00 AM |
| Project Title | Big Bend Depressing Air System |
| Physical Address | View project details and contacts |
| City, State (County) | Chamberlain, SD (Brule County) |
| Category(s) | Single Trades |
| Sub-Category(s) | Mechanical |
| Contracting Method | Competitive Bids. |
| Project Status | Accepting Letters of Interest |
| Bids Due | View project details and contacts |
| Estimated Value | $500,000 to $1,000,000 |
| Plans Available from | Federal Agency |
| Owner | View project details and contacts |
| Architect | View project details and contacts |
| Description | Rehabilitation of the depression air compression system. This system is integral to Big Bend’s ability to operate in synchronous condensing mode, as it provides the compressed air required to depress the water level in the draft tube to a point below the turbine runners. There are currently four Ingersoll Rand XF-75 Rotary Screw air compressors, three being water cooled, and one being air cooled. The current compressors are rated for 315 CFM at 100 psi. It is anticipated for this requirement that two compressors will be retained and two will be replaced. The new compressors are to be rated at 150 hp and 812CFM at 115psi capacity. |
||
| Details |
|
||
| Bidder's List | View project details and contacts | ||
| Prospective Bidders | View project details and contacts | ||
| Project Documents |
 Engineered Spec Sheet  Architectural Plans  Other Documents |
