Regional Wastewater Treatment Plant Injection Well Mechanical Integrity Testing

The Work of the Contract comprises the mechanical integrity testing of existing deep injection wells IW-1 and IW-2. The work set forth within these bid documents includes the furnishing of all labor, materials, equipment, services and incidentals for the testing of the wells. Maintenance of existing operations is mandated throughout the testing period. A. The Contractor shall furnish all labor, tools, supervision and equipment necessary to perform the work specified herein and as required for a complete installation, including surface preparation and painting. The Owner will provide the paint. B. After reinstallation of piping and installation of ball valve, the Contractor touch up paint on the ball valve, all reassembled piping joints and on other areas marred by contractor’s work activities. All areas requiring touch up paint shall first be properly prepared with hand or power tools.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Cast-in-Place Concrete.
Division 22 -	Plumbing, Plumbing Piping, Plumbing Equipment.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems.
Division 33 -	Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Water Utility Pumping Stations, Wells.
Division 44 -	Pollution and Waste Control Equipment, Water Pollution Control Equipment.