Kimbeland Pump Station Improvements

The work for the Kimbeland Pump Station Improvements Project in general consists of the following: 1. Removal/abandonment of the existing below grade steel dry-pit pump station structure/equipment; existing 6’ by 6’ reinforced concrete wet well; connecting 36” RCP; bypass pumping portal, electrical control/power panels; and miscellaneous sitework/utility modifications. 2. Rehabilitation and modification of the existing 7’ diameter flat-top manhole. 3. Installation of approximately 60’ of 10” DIP Hwy. 61 East Pump Station bypass force main, 22’ of 12”PVC force main, and all required fittings, valves, thrust blocks, etc. 4. Installation of approximately 290’ of 16” DIP and 34’ of 15” PVC gravity sewer lines with four (4) new manholes. 5. Installation of buried electrical conduits, hand holes, sectionalizing cabinets and transclosure. 6. Construction of a new duplex submersible pump station with wet well/valve vault; emergency generator, new electrical/water/phone service connections; site improvements/fencing; connection to existing 12” force main; and all other miscellaneous work and appurtenances necessary to complete the project. 7. Construction of new on-line detention storage to serve new duplex submersible pump station.

Lift and Pump Stations, Renovation.

Division 02 -	Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Lighting.