Chlorine Contact Basin Painting

Bell County Water Control Improvement District No. 1 (District) is soliciting a Request for Bid for the cleaning and epoxy coating of 1 of the Districts Chlorine Contact Basin Questions should be addressed to: Trevor Butler 201 S. 38th Street Killeen, TX 76543 254.681.3851 The District reserves the right to waive irregularities and reject any or all bids. Bell County Water Control & Improvement District No. 1 (District) is soliciting bids for the cleaning and epoxy painting of one (1) of our Chlorine Contact Basins. Background There are a total of four (4) Chlorine Contact basins. They are made of concrete and cinder block walls. The District is pursuing have one (1) painted at this time. The inside dimensions of 1 Basin is: 70'Lx22'Wx15'D (exterior wall 30'D) Scope of Work Clean and Grout/Prep all surfaces. To include the walls, tops of the walls, and the metal weir. This Basin is on an exterior wall. The exterior wall shall be included from the floor to over the top. This does not include coating the floor. Paint with two (2) coats of Sherwin Williams Tank Clad HS two-part, high-solids, epoxy coating (or Approved equivalent). -Surface Preparation - Grout (All cinder block walls to be done) After cleaning surface with high pressure spray, sufficient drying time must be allowed, before proceeding to the grouting of the cinder block walls. No moisture should be present.

Division 09 -

Finishes, Painting.