MJ Kirwan Dam Security Fence Installation

This project is to remove the existing security fence and replace it with new fencing in the same approximate location; a new 8 feet high Security Fence with a barbed-wire apron on extension arms, with gates of the same height and configuration as the fencing, at Michael J. Kirwan Dam and Reservoir. In general, the tasks required in the performance of this contract include: Providing a Security Fence around the Maintenance Complex. Demo and dispose of the existing approximately 765 feet Security Perimeter Fence, including, but not limited to the poles and concrete and the four (4) gates, three (3) Personnel gates, one (1) on each side of the Maintenance building and one (1) in the back corner near to the Outflow and one (1) road gate.Install approximately 765 feet of new perimeter fencing in accordance with the reference pictures and drawings.Install a new 16 feet wide swing gate at road. Install three (3) Personnel gates, one (1) on each side of the Maintenance building and one (1) in the back corner near to the Outflow, in the same locations as the existing gates.

Division 32 -

Exterior Improvements, Fences and Gates.