Big E Hot Water Improvements

This project consists of, but is not limited to: 1. Provide a new electric domestic water heating system with thermostatic mixing valve, hot water recirculation pump, expansion tank, storage tanks (2), and water heaters (4). Remove and provide new domestic hot & cold water and hot water recirculation piping as shown on drawings. Remove existing domestic water heaters and associated electrical (with the exception of the tank in the detached shed). 2. Remove existing sink faucets as shown to be replaced with 2.2 gallon per minute faucets. 3. Provide new handwashing (2) and mop (1) sinks as shown in drawings. 4. Remove three 3-bay sinks and replace with two new 3-bay sinks. 5. Provide a new kitchen hood exhaust system including: kitchen hood, exhaust fan, roof curb, roof opening, structural support, rated exhaust grease duct, duct insulation, controls, hood fire suppression system, light fixtures, and gas valve. 6. Provide new electrical to add hot water heaters, ventilation hood and fan with adjacent shunt trip breaker protection and equipment receptables, and pumps. 7. Provide a fire alarm connection to the hood fire suppression system and fire alarm reprogramming. 8. Frame and cut a structural roof opening and provide membrane roof flashing for the hood grease duct. 9. Provide a hood backsplash, framing, and a fall arrest anchor at the roof. 10. Paint exposed structural, mechanical, electrical, and plumbing. 11. Remove and install finishes to match as required by the building system remodeling (painted plywood & painted V profile shiplap on walls with painted trim). 12. Provide a concrete mechanical equipment pad.

Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.
Division 26 -	Electrical.