Venable Wood Floor Refinishing

Major Re-Finish 1. Document sports/game markings (if existing) 2. Sand the floors to remove ridges, cupping, gouges, & old finishes so as to create a smooth surface free of drum stop marks, gouges, streaks, or shiners; contact the City representative to review deep gouges, damage, or areas where sanding and material removal should be minimized; 3. Prep the floors as recommended by the finish manufacturer and accepted wood floor trade association standards (MFMA); 4. Repaint sports/game markings with appropriate paint as recommended by the finish manufacturer 5. Vacuum and tack the entire floor, paying particular attention to edges and corners, as instructed by the finish manufacturer; 6. Apply sealer (as required) per finish manufacturer’s instructions; 7. Apply a minimum of three (or as many as may be required to provide sufficient coverage) even coats of the specified finish per the finish manufacturer’s instructions, buffing and vacuuming (or tack) between each coat after it dries; ensure complete coverage and uniform appearance.

Division 09 -

Finishes, Flooring.