Clark Building Roof Removal and Replacement

1. Shingle and other roofing material colors to be selected by owner. 2. Obtain building permit. 3. Remove and dispose of all existing roofing down to the roof deck, including shingles, underlayment, flashing, edging, and fasteners. 4. Remove, protect, and store existing gutters. 5. Remove and dispose of existing skylights and fill in roof openings with framing and plywood roof deck. Install framing, fiberglass insulation per code, sheetrock, tape, spackle, primer, and paint to fill in interior skylight openings. 6. Remove any damaged or deteriorated roof deck and replace with plywood at the unit price bid per 4’ x 8’ sheet. 7. The Contractor is responsible for supplying dumpsters and for removal and disposal of all removed material, trash, and debris from the project. 8. Tarps shall be used to protect the building, plantings, vehicles, and the public from debris. The job site shall be kept neat at all times and shall be fully cleaned at the end of each work day, including picking up any nails using magnets. 9. The driveways, parking lot, and building entrances shall be protected from debris during construction. The Contractor is responsible for safely conducting his operations to protect the public using the building.

Division 07 -

Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.