Similar Projects
Last Updated | 06/29/2023 08:17 AM |
Project Title | Broome DDSO-Valley Ridge Exterior Painting |
Physical Address | View project details and contacts |
City, State (County) | Norwich, NY 13815 (Chenango County) |
Category(s) | Single Trades |
Sub-Category(s) | Painting |
Contracting Method | Competitive Bids |
Project Status | Sub-Bidding, Construction start expected August 2023 |
Bids Due | View project details and contacts |
Estimated Value | $50,000 [brand] Estimate |
Plans Available from | Agency's Affiliate |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | Pressure wash areas to be painted, prime bare wood as needed. Apply one coat of Sherwin Williams Duration Desert Sand (SW3030) cedar shingles and one coat of Sherwin Williams Duration Tobacco (SW3039) to all trim areas including roof overhang and ceilings. Submit Quotes & All Quote Inquiries to: Name: Brenda Crumb Phone: 607-940-1038 Phone: 607-240-4626 Fax: 607-770-0204 Email: BRM.Bids@opwdd.ny.gov The painting areas are indicated in red at the end of this scope DESCRIPTION: (Program building exterior painting). The vendor shall provide all labor and materials necessary to complete the work in a professional manner according to this scope of work and architectural drawings if supplied. Work is to be completed within 60 days of award, unless modified below. This is a NYS Public Works project and prevailing wages are to be paid. Refer to attached specification for the following scope of work. Site must be clean, and all materials secured at the end of each workday. Absolutely no scraps, especially fasteners, are to be left unsecured. Upon completion of (Painting cedar shakes and trim of the program buildings secure side of fence), before removal of equipment and scaffolding, contractor is to schedule a quality control and quality assurance inspection with the Maintenance Supervisor. SCOPE OF WORK includes, but is not necessarily limited to the following: 1. Pressure wash areas to be painted, prime bare wood as needed. Apply one coat of Sherwin Williams Duration "Desert Sand" (SW3030) cedar shingles and one coat of Sherwin Williams Duration "Tobacco" (SW3039) to all trim areas including roof overhang and ceilings. 2. The painting areas are indicated in red at the end of this scope |
||
Details |
|
||
Bidder's List | View project details and contacts | ||
Prospective Bidders | View project details and contacts | ||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |