Wolfe Park Bollards

Install all bollards, cable, and sleeves per provided installation guidelines/specifications. Provide labor/equipment, concrete, 3/8” galvanized cable, yellow PVC pipe and all hardware needed to complete this installation. Note 3/8” cable clamps will be needed at the two ends of each four bollard set, two clamps at each end. Work with CRPD project manager to avoid scheduling conflicts with park activities. Return park to pre-installation condition. This would include: removing excess soil, grading, seeding, cleaning hard surfaces, and repairing all asphalt that was damaged. Repaired asphalt will be sealed at all connection points where old and new asphalt meet if necessary. No trees will be impacted as a result of this project. The CRPD tree protection layout plan is one of the enclosures included for this project. It will be followed for any trees that fall within 30’ of the bollard and cable installation location. The protection measures will need to be adjusted where the canopy of the tree overlaps the bollard and cable installation plan and where asphalt lays under the dripline of the tree.

Park/Playground, Renovation.

Division 11 -	Equipment, Play Field Equipment and Structures, Playground Equipment, Play Structures.
Division 31 -	Earthwork, Selective Clearing, Grading.
Division 32 -	Exterior Improvements, Athletic and Recreational Surfacing, Site Improvements, Fences and Gates, Planting.
Division 33 -	Utilities.