Replacement of County Road 6 Bridge Over Vanloon Creek

The project includes removing and replacing the existing bridge carrying CR 6 over Vanloon Creek. The new structure will consist of a three-sided precast concrete superstructure with an asphalt wearing surface. The substructure will consist of cast-in-place concrete footings and wingwalls, supported on driven steel H-piles. The new structure will be constructed behind the existing abutments, the entire existing substructures will be removed to allow for creation of a natural streambed. The project includes approximately 400 linear feet of full depth approach roadway reconstruction to tie the new bridge into the existing roadway profile. New bridge and approach guide railing will be installed within the project limits. A grade control structure will be installed downstream of the new bridge. Traffic will be maintained using an off-site detour during construction.

Bridge, Renovation.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.