Similar Projects
Last Updated | 01/25/2019 02:46 PM |
Project Title | Construction of a New Compound Semiconductor Laboratory and Microelectronics Integration Facility on the MIT Ll Campus at Hanscom Air Force Base |
Physical Address | View project details and contacts |
City, State (County) | Lexington, MA (Middlesex County) |
Category(s) | Laboratory |
Sub-Category(s) | Laboratory |
Contracting Method | Competitive Bids. |
Project Status | Pre-Solicitation, Bidding Expected February 2019 |
Bids Due | View project details and contacts |
Estimated Value | $100,000,000 to $250,000,000 |
Plans Available from | |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | Massachusetts Institute of Technology Lincoln Laboratory (MIT LL) is a Federally Funded Research and Development Center (FFRDC) chartered to apply advanced technology to problems of national security. The project scope of work described herein involves the construction of a new Compound Semiconductor Laboratory and Microelectronics Integration Facility on the MIT LL campus, which is located on Hanscom Air Force Base (HAFB), Lexington, Massachusetts. The Compound Semiconductor Laboratory and Microelectronics Integration Facility (CSL-MIF) building is a Military Construction-Air Force (MCAF) project currently programmed to begin construction in Fiscal Year 2019. The CSL-MIF consists of approximately 162,000 gross square feet (GSF) of new laboratory and office space which includes a Clean Room complex for use by the Advanced Technologies Division of MIT LL. The intent of the CSL is to consolidate MIT LL's existing compound semiconductor materials growth, fabrication and characterization facilities. The intent of the MIF is to consolidate and enhance MIT LL's facilities for the fabrication and packaging of specialized advanced electronic prototypes. The building is anticipated to be three stories and constructed using concrete foundations, a steel and reinforced concrete superstructure, and energy efficient building systems, envelope, and roofing. The new building will be connected to other MIT LL buildings via a pedestrian connector bridge as part of this project. Specialized construction requirements include large and sophisticated clean rooms for microprocessor development and experimentation (the total cleanroom area under filter is approximately 35,000 net square feet, designed to Federal Standard (FED STD) 209E Class 10/International Organization for Standardization (ISO) Class 4 standards); associated complex HVAC and electrical requirements; secure communications areas; hazardous, toxic, and corrosive process liquid and gas storage, transport, distribution and associated waste collection systems; and a structural and foundation system that minimizes vibrations and noise in the clean room areas. The facility will be constructed to meet Institute of Environmental Sciences and Technology (IEST) standards for vibration control (VC) to VC-C/D with select portions to VC-E. Required support process utilities include the following: Equipment Cooling Water (ECW), Clean Dry Air (CDA), three (3) grades of gaseous nitrogen (N2), Liquid nitrogen (LN2), Process Vacuum (PVAC), Ultra-Pure Water - semiconductor grade (UPW), 120/208/480V single-phase and three-phase power with UPS, liquid waste treatment (pH adjustment), and abatement of hazardous exhaust streams. The CSL-MIF is to be located on an existing paved parking lot that contains a cluster of trees in the center and is surrounded by other structures and as such is considered a constrained site. The site slopes from south to north with a change in grade of approximately 28 feet. Site improvements will include demolition of 5 buildings, expansion of the main chiller plant, providing a new feed from the main electrical distribution plant, access roads, replacement parking, relocation of existing utilities and new utility connections, landscaping, and all other work necessary to make this a complete and usable project. Facilities are being designed as permanent construction in accordance with the Department of Defense (DoD) Unified Facilities Criteria (UFC) 1-200-01, General Building Requirements. This project will comply with DoD antiterrorism/force protection requirements per UFC 4-010-01, sustainability principles in accordance with UFC 1-200-02, and High Performance and Sustainable Building Requirements. Note that installation of laboratory-owned equipment and high-value tool sets will be completed by others. This project is on a secure DoD facility and involves sensitive information; all members of the contractor's team who work on this project must be US citizens and will be subject to a background check. As noted above, the proposed location for the CSL-MIF is presently a parking lot on a constrained site. Therefore, a laydown, staging and storage area will be created approximately one-quarter mile south of the CSL-MIF building location by the tear-down and removal (i.e., demolition) of five 1950s era buildings. The building demolition will include the complete removal of associated building foundations and utilities, and backfilling the foundation areas with suitable fill. This work will require the abatement of hazardous waste in the buildings, including but not limited to, asbestos and lead paint and other materials common to building construction of the 1950s. | ||||||||||||||||||||||||||
Details | 1 Laboratory, Approximately 162,000 SF New Construction.
|
||||||||||||||||||||||||||
Bidder's List | View project details and contacts | ||||||||||||||||||||||||||
Prospective Bidders | View project details and contacts | ||||||||||||||||||||||||||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |