Food Service Building: Replace Roof

Bid date has been extended from 3/7/2023 to 3/14/2023. For the above referenced project. Base Bid: Tear Off and New Roof Installation The Food Service building is located on the Washington State University Campus in Pullman WA. This roof project will remove existing roofing system to metal deck (removal includes asbestos abatement of existing roofing components as outlined in the attached Good Faith Asbestos and Lead Survey by WSU) and install new fully adhered 60 mil non-reinformed EPDM single-ply membrane over new 5/8" cover board over new tapered polyisocyanurate rigid insulation over new vapor barrier (minimum roof slope-3/8"/ft). Design of new roofing system to conform to most current Carlisle Roofing (or approved equal) system requirements and details and WSU Standard roof replacement requirements. Design to be reviewed and approved by WSU Project Manager. Peak gust wind warranty to be for 100mph. Roofing area is approximately 32,200 square feet. Construction duration is 90 calendar days from the notice to proceed to Substantial Completion. Bidders cost estimates for this contract must be based on this contract time. Early completion schedules and/or costs based upon less than the calendar days stipulated herein will not be recognized. Project address: 2420 E Grimes way Pullman, WA 99164. Bid Estimate: $740,000-$780,000 Deductive Alternate No. 1: 115 Fleeceback Overlay In lieu of removing and installing a new roof, overlay the existing modified bitumen roofing with 115 TPO Fleeceback membrane, mechanically fastened to the existing 32,200 square foot metal roof deck. Contractor shall perform a thermal scan of the roof prior to start of construction. Identify the meeting and project when obtaining the permit to receive appropriate rates. Bid documents may be obtained at portal. Contractors who would like to be included on the Planholder's list shall either attend the pre-bid meeting or request to be added by emailing contracts@wsu.edu. Printing Disclaimer: The bidding documents are available for all interested bidders and plancenters. The University does not provide printing services; it is the bidder's responsibility to print the drawings to the appropriate scale indicated. We encourage the use of professional printing shops. Owner reserves the right to reject any and all bids and to waive any informalities or irregularities in the bids received. ROOFING OVERLAY ONTO EXISTING ROOFING MATERIALS. Should bidders find discrepancies in, omissions from, or unclear information within the Contract Documents, they should notify Owner at once. Owner shall issue a written instruction in the form of an addendum to all bidders. Neither the Owner nor Architect/Engineer will be responsible for any oral instructions. Questions received less than 7 Days before bid opening may not be answered. Question Deadline 02/28/2023

32,200 SF.

Division 07 -

Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.