Asbestos Abatement and Demolition Projects

The Contractor shall remove all asbestos-containing material according to the asbestos survey report and/or design specifications prepared for this project and in compliance with all EPA, OSHA, and DOLI regulations, and any other applicable law, using best practices. Recommendations are located in the survey report and/or design specifications prepared for this project. b. The Contractor shall contact the environmental contractor that prepared the asbestos survey report to schedule a final clearance inspection. Contact information for the asbestos contractor is located on the survey reports. Asbestos must be removed on all buildings prior to contacting the testing agency. c. The Contractor shall submit the required notifications to the Department of Labor and Industry (DOLI), and any other agency required to be notified, upon notice to proceed and is responsible for all associated costs. d. The Contractor shall furnish all labor, equipment, supervision, and incidentals necessary to provide complete asbestos abatement for each authorized property. The Inspections Office shall send a utility release form to have water, gas, electric, and any applicable utilities disconnected. b. The contractor is responsible for the disconnection of the sewage pipe. The building sewer shall be capped with an appropriately sized Fernco-style cap at the point of disconnect. A pressure treated 2x4 should be installed vertically directly behind the cap and cut flush with the ground to mark the location of the cap off. A 1/2” x 6” or larger Hex Lag Hot Dipped Galvanized Steel Screw should be drilled and screwed into the top of the 2x4 at ground level in order to find the cap off location in the future with a metal detector.

Division 02 -

Existing Conditions, Demolition, Selective Demolition, Asbestos Remediation, Asbestos Abatement.