Locker Room Renovation Project - Flooring Installation

Project Area (1) is limited to the existing Men’s and Women’s locker areas only and does not extend into toileting, shower, washing areas or common hallway areas. Work shall include field measurements of both Men’s and Women’s locker room floors. Existing carpet tile is from original building and applied directly to the subfloor underneath lockers and is to be removed by locker contractor. New lockers will be installed directly on top of subfloor. Flooring contractor is responsible for preparing subfloor for new carpet tiles, patching and leveling as needed, removing existing cove base and patching wall as needed, installing new carpet tiles around base of lockers, installing new cove base. Project Area (2) is a small room off the main corridor housing electrical panels and highly sensitive IT equipment. Current flooring is damaged and chipping in multiple areas. Flooring contractor is to fully seal and protect existing functioning IT and electrical equipment following the guidance of the Town IT supervisor prior to starting any work. Damaged flooring is to be removed to the extent possible, remaining floor to be skim coat leveled, sealed, and new carpet tile installed on top and to base of existing equipment. It is understood that not all existing flooring can be removed due to the placement of existing drilled in equipment, expectations are to seal and prevent further damage to the floor as much as possible to provide a safe, dust free environment.

Division 09 -

Finishes, Flooring.