Last Updated 07/29/2022 03:05 PM
Project Title

CMC Office Remodel - Engineering and Inspections Offices

Physical Address View project details and contacts
City, State (County) Conroe, TX 77301   (Montgomery County)
Category(s) Government/Public
Sub-Category(s) Military Facility
Contracting Method Competitive Bids
Project Status Construction start expected August 2022
Bids Due View project details and contacts
Estimated Value $200,000 [brand] Estimate
Plans Available from Municipal Agency
Owner View project details and contacts
Architect View project details and contacts
Description

For Conroe Municipal Center Office Remodel - Engineering and Inspections Offices SCOPE OF WORK: Remodel of Existing Engineering and Inspection Office spaces Room 190 Frame, drywall, tape & float 14 linear ft of metal stud wall to 9' ceiling grid Texture and match paint of existing walls Install drywall, paint and texture to include electrical drops below window where millwork was removed. Room 191 Repair drywall to include texture & paint Install 30/70 mahogany door with window & bronze frame to enclose office with matching hardware. Room 204 Install metal stud dividing wall in existing office Frame, drywall, texture & paint to match existing Install new 60/70 mahogany door & bronze frame to create storage area with matching of current hardware. Room 162 Frame, drywall, tape & float dividing wall to ceiling grid Texture & match paint of existing walls Install 5'x5' storefront window and bronze frame in exterior hallway wall Relocate HVAC according to the needs of the new space. Re-work electrical lighting & switching Room 173 Add additional lighting and AC Duct work to accommodate 3 office spaces. Frame, drywall, tape & float 2 new dividing walls. Provide and install a new suspended grid ceiling in 2 offices. Ceiling tiles will be provided. Float, texture & paint concrete walls to match existing building Install (2) new 5'x5' bronze welded frame windows in existing hallway cylinder block wall Install (2) 30/70 mahogany doors & bronze welded jambs in existing hallway cylinder block wall. Doors to match current doors in building/current hardware Install electrical plugs/switches Install or repair necessary flooring for new spaces. Flooring materials provided by the City. All walls will be constructed of 18-gauge metal studs and 5/8" drywall Electrical work will be performed under the National Electric Code using MC cable. All HVAC modifications will be performed under the International Mechanical Code. Permits required for all work. Permit fees will be waived. All work to be performed during normal business hours unless noise interferes with business work activities. (Cinder block work will begin at 5:30 on a weekday) Contractor will place a construction dumpster in back parking lot in a designated location. Work area will be cleaned up daily of visible trash. Work areas will be isolated to avoid any excessive dust including vents and returns for employee safety.

Details

Division 02 - Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 03 - Concrete, Cast-in-Place Concrete, Precast Concrete.
Division 04 - Masonry, Unit Masonry.
Division 05 - Metals, Structural Metal Framing.
Division 06 - Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Architectural Woodwork.
Division 07 - Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Thermal Insulation, Weather Barriers.
Division 08 - Openings, Doors and Frames, Metal Doors and Frames, Wood Doors, Plastic Doors, Specialty Doors and Frames, Entrances and Storefronts, Curtain Wall and Glazed Assemblies, Windows, Hardware.
Division 09 - Finishes, Plaster and Gypsum Board, Tiling, Ceilings, Acoustical Ceilings, Flooring, Resilient Flooring, Carpeting, Acoustic Treatment, Painting and Coating, Painting.
Division 10 - Specialties, Visual Display Units, Signage, Compartments and Cubicles, Toilet Compartments, Partitions, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Storage Assemblies, Flagpoles.
Division 12 - Furnishings, Window Treatments, Casework, Office Furniture, Multiple Seating.
Division 21 - Fire Suppression, Fire-Suppression Sprinkler Systems.
Division 22 - Plumbing, Facility Water Distribution, Facility Sanitary Sewerage, Facility Storm Drainage, Plumbing Equipment, Plumbing Fixtures.
Division 23 - Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Piping and Pumps, HVAC Air Distribution.
Division 26 - Electrical, Instrumentation and Control for Electrical Systems, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 - Communications, Structured Cabling, Data Communications, Voice Communications.
Division 28 - Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Fire Detection and Alarm.
Division 31 - Earthwork, Site Clearing, Grading, Soil Treatment.
Division 32 - Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Planting Irrigation, Turf and Grasses.
Division 33 - Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities.

Bidder's List View project details and contacts
Prospective Bidders View project details and contacts
Project Documents
 Engineered Spec Sheet
 Architectural Plans
 Other Documents