Deer Creek Bridge Replacement

Remove and dispose of the existing timber bridge structure and timber abutments. The existing timber structure spans roughly 15’ and is one lane (~10’) wide. The structure is located on the Willow Creek Road over Deer Creek. The structure will be replaced with an aluminum box culvert. The complete work scope will include all associated work such as excavation, backfill, concrete foundations, riprap wing walls and scour protection, a new gravel road surface over the bridge, slope restoration, and erosion control measures. To provide access to the other side of the bridge during construction. The detour route is on the existing snowmobile trail. It will need some repairs including, but not limited to, filling low areas from an onsite pit, grading, mowing, tree removal, and hauling in gravel.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.