Miller Showers Dredging And Disposal

**As of February 15, 2024, the project is on hold. Project will be rebid in March 7, 2024.** As of January 30, 2024, this project has not yet been awarded. A timeline for award has not yet been established. All other project inquiries should be directed to Katherine Zaiger, City of Bloomington Director of Environmental Programs, at (812) 349-3656 or katherine.zaiger@bloomington.in.gov The City of Bloomington Utilities (CBU) has the responsibility for the operation and maintenance of the detention pools at the Miller Showers area for the purpose of stormwater management. This includes dredging as needed to maintain storm water capacities and periodic maintenance on the sediment traps. These storm water pools must be dredged to maintain their hydraulic capacity. The solids removed must be dried to a range from 21%- 23% solids content and transported to a permitted landfill. Total quantity to remove is assumed to be about 2,900 cubic yards. Hydraulically dredge 5.56 acres of open water in two ponds at Miller Showers Park to remove excess sediment. Pump water from the dredging project into four 100-foot by 30-foot geotextile sediment tubes located east of the stream north of the two ponds before releasing the water back into an Unnamed Tributary to Griffy Creek. After completion of the dredging the material will need to be dewatered to a range from 21% to 23% solids content and must be able to be disposed of in a traditional landfill. The contractor must keep records of loads of material removed. The dewatered solids must then be transported to a final disposal location APPROVED BY THE CITY within a 75-mile radius of the disposal area. The Utility Service Board reserves the right to waive any informality and to accept or reject any or all bids submitted. Bids may be held by the Utility Service Board for a period not-toexceed ninety (90) days from the date of the opening of Bids for the purpose of reviewing the Bids, investigating the qualifications of the Bidders prior to awarding the contract, and awarding the contract. Bid Security: Acceptable Bidder's bond or certified check drawn on an acceptable bank in an amount of not less than 5% of the total bid price; For bids of $100,000.00 or more, the successful bidder shall furnish performance and payment bonds for one hundred percent (100%) of the contract amount prior to the execution of the contract, and said bonds shall remain in effect for a period of one (1) year after final acceptance of the work. Anticipated Award Date: January 16, 2024

Division 03 -	Concrete.
Division 04 -	Masonry.
Division 05 -	Metals.
Division 06 -	Wood, Plastics, and Composites.
Division 07 -	Thermal and Moisture Protection.
Division 08 -	Openings.
Division 09 -	Finishes.
Division 10 -	Specialties, Signage, Toilet, Bath, and Laundry Accessories, Fire Protection Specialties, Fire Extinguishers, Storage Specialties.
Division 11 -	Equipment.
Division 12 -	Furnishings.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC).
Division 26 -	Electrical.
Division 27 -	Communications, Data Communications, Voice Communications, Audio-Video Systems.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork.
Division 32 -	Exterior Improvements, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Water Utility Distribution Equipment, Water Utility Pumping Stations, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains.
Division 40 -	Process Integration, Water Process Piping.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.