Signal Pole Replacement

• Install new 36” caisson (vac. Truck method is highly recommended due to utility probability) • Remove existing pull box • Remove existing ped pole & caisson (the button will move to new pole) • Install new 17”x30” pull box BID NUMBER, Bid Title Page 5 of 8 • Remove and replace existing concrete flatwork (approximately 5 square yards) • Install new traffic signal pole and mast arm (50’) per CDOT S-standard 614-40A. Pole will be provided by owner • Remove existing caisson to 2 feet below finished grade • Furnish and install new 3” electrical conduit from pull box to new pole (approximately 10 feet) • Install 2 new pedestrian signal heads, and 2 ped buttons (install only) • Furnish and install 4 signal heads (12”-12”-12”) • Install detection camera (provided by The City of Ft Collins) • Install fire preemption eye (provided by The City of Ft. Collins) • Install new luminaire (provided by The City of Ft. Collins) • Associated wiring per CDOT standards • Provide traffic control as needed to perform the work. • Mobilization

Division 34 -

Transportation, Transportation Signaling and Control Equipment, Roadway Signaling and Control Equipment, Traffic Signals, Traffic Control Equipment.