Phase-6 Wastewater Treatment Plants Improvements

Proposals must be made on the blank form provided in the Contract Documents, and must be enclosed in a sealed envelope and addressed to the Mayor, Town of Scotland Neck, North Carolina. The name and address and qualified Licensing Number of the Bidder must be plainly marked on the outside of each envelope. Pursuant to N.C. Gen. Stat. 87-15, by submitting a bid, the Bidder represents that it is appropriately licensed by all applicable Licensing boards for the scope of Work presented herein. The project scope of work consists of the furnishing of all materials, labor and equipment necessary to install the following: Rehabilitation and improvements to the existing headworks, bar screen and grit removal, equipment, influent pump station, brush rotor replacement, existing aerobic digester diffused air improvements, existing filter pump station electrical improvements and miscellaneous site work and piping. There are two (2) WWTP projects bidding, Phase-5 Contract 1 and Phase-6 Contract 2. Contractors shall provide a bid proposal for both projects to be considered responsive The Contract Document for the above work is on file and available for inspection during regular business hours between 8:00 a.m. and 5:00 p.m., Monday through Friday at the following locations: TOWN OF SCOTLAND NECK 1310 Main Street Scotland Neck, NC 27874 252/826-3152 Engineering Services, PA 1202 Benson Road, Suite #200 PO Box 1849, Garner, NC 27529 919/662-7272 The Contract Document for the above work is on file and available for inspection during regular business hours between 8:00 a.m. and 5:00 p.m., Monday through Friday at the following locations: TOWN OF SCOTLAND NECK 1310 Main Street Scotland Neck, NC 27874 252/826-3152 Engineering Services, PA 1202 Benson Road, Suite #200 PO Box 1849, Garner, NC 27529 919/662-7272 Each Proposal must be accompanied by a certified or cashier's check payable to the order of the Owner, Town of Scotland Neck, Scotland Neck, North Carolina, or a satisfactory bid bond executed by the Bidder and a corporate surety licensed under the laws of the State of North Carolina to execute such bonds in an amount not less than 5% of the bid as a guarantee that the Bidder will within ten (10) days after the date of the Bidder's receipt of the NOTICE OF AWARD of a contract, execute an agreement and file same as required by the Contract Document if his Proposal is accepted. If a Bidder fails to execute and file an agreement, the amount of his security shall be forfeited as liquidated damages. Each Proposal must be accompanied by a certified or cashier's check payable to the order of the Owner, Town of Scotland Neck, Scotland Neck, North Carolina, or a satisfactory bid bond executed by the Bidder and a corporate surety licensed under the laws of the State of North Carolina to execute such bonds in an amount not less than 5% of the bid as a guarantee that the Bidder will within ten (10) days after the date of the Bidder's receipt of the NOTICE OF AWARD of a contract, execute an agreement and file same as required by the Contract Document if his Proposal is accepted. If a Bidder fails to execute and file an agreement, the amount of his security shall be forfeited as liquidated damages. Each Proposal must be accompanied by a certified or cashier's check payable to the order of the Owner, Town of Scotland Neck, Scotland Neck, North Carolina, or a satisfactory bid bond executed by the Bidder and a corporate surety licensed under the laws of the State of North Carolina to execute such bonds in an amount not less than 5% of the bid as a guarantee that the Bidder will within ten (10) days after the date of the Bidder's receipt of the NOTICE OF AWARD of a contract, execute an agreement and file same as required by the Contract Document if his Proposal is accepted. If a Bidder fails to execute and file an agreement, the amount of his security shall be forfeited as liquidated damages.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Toilet, Bath, and Laundry Accessories, Emergency Aid Specialties, Fire Protection Specialties, Fire Extinguishers, Storage Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 12 -	Furnishings.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Audio-Video Systems, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Water Utility Pumping Stations, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 40 -	Process Integration, Water Process Piping.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.